咨询热线:

400-0733-598

深圳市创盈时代科技有限公司

联系人:汪菲菲

电话:0755-81779389

手机:18819037886

QQ:2764836233

Email:chytime@chytime.com

地址:深圳市沙井沙一社区万安路长兴科技园16栋2楼

您所在的位置:首页 > 技术文库 > 点胶机技术文章 >

胶水会影响自动点胶机产品封装质量吗

发布时间:2018-10-22 15:49:22   来源:本文搜集于网络,由自动点胶机厂家创盈时代整理并发布,欢迎转载    点击:

胶水的选择对点胶产品封装质量的影响意义颇为重大,而封装胶水的差异性对自动点胶机设备的选择也有着至关重要的影响。自动点胶机设备本身是控制胶水吐出量和吐出时间的装置,因此在使用自动点胶机之前,要把影响点胶质量的胶水问题解决。那么如何根据胶水的功能与性质对封装设备进行选择就是点胶机厂家需要重点关注。
The choice of glue has a significant impact on the quality of the packaging of the dispensing product, and the difference of the encapsulation glue has a vital influence on the selection of the automatic dispenser equipment. Automatic dispensing machine equipment itself is to control the amount of glue and the discharge time of the device, so in the use of automatic dispensing machine, the impact of the glue quality problems to solve. Then how to choose the packaging equipment according to the function and nature of the glue is the point glue machine manufacturers need to focus attention.
点胶机      

根据胶水分类的不同而进行的封装设备分类主要有UV胶点胶机、AB胶点胶机、密封胶点胶机、黑胶点胶机、环氧胶点胶机、阻尼油点胶机、COB黑胶点胶机、502胶点胶机、油脂点胶机、邦定胶、邦定胶点胶机、白胶点胶机、锡膏点胶机、银胶点胶机、红胶点胶机、硅胶点胶机等。
According to the different classification of the glue packaging equipment classification mainly has UV glue dispensing machine, AB glue dispensing machine, sealant dispenser, black glue dispensing machine, epoxy glue dispenser, damping oil dispenser, cob black glue dispensing machine, 502 glue dispensing machine, grease dispenser, bonding glue, bonding glue dispenser, white glue dispensing machine, solder paste dispensing machine, and other rubber dispenser Silver glue dispensing machine, red glue dispensing machine, silicone rubber dispenser.

UV胶水、AB胶胶水、密封胶胶水、黑胶、环氧胶等都是自动点胶机应用产品中最常应用的一些封装胶水。其性质与功能各不相同。以UV胶水为例,在需要利用这类胶水进行封装的应用场合,点胶封装设备的选择与操作都非常关键。这类胶体比较容易受到UV光、紫外线光的干扰,因而在胶筒的选择上,需要选择一些防紫外线、防UV光的胶筒。而在点胶机设备的选择上也是如此,最大程度上规避因为胶水的性质对封装产品质量造成不利影响的问题。
UV glue, AB glue, sealant glue, black glue, epoxy glue, etc. are the most commonly used in automatic dispensing machine application of some of the packaging glue. Its nature and function are different. Taking UV glue as an example, the choice and operation of dispensing equipment is critical in applications where this type of glue is needed for encapsulation. This kind of colloid is more susceptible to UV light, ultraviolet light interference, so in the choice of rubber tube, you need to choose some anti-ultraviolet, anti-UV light cartridge. In the selection of dispensing machine equipment is also the case, the maximum degree of avoidance because of the nature of the glue to the packaging product quality adversely affect the problem.

深圳市创盈时代科技有限公司是一家专注于平台点胶机,落地式点胶机,视觉点胶机,非标自动化设备的研发生产和销售于一体的国家高新技术点胶机厂家。

本文关键字:点胶机胶水

原文地址:http://www.chytime.com/news/djjs/1769.html

本文由www.chytime.com 深圳创盈时代科技有限公司 自动点胶机整理,欢迎转载,转载时请标明出处。

上一篇:如何根据自己的需求来选择点胶机
下一篇:最后一页