咨询热线:

400-0733-598

深圳市创盈时代科技有限公司

联系人:汪菲菲

电话:0755-81779389

手机:18819037886

QQ:2764836233

Email:chytime@chytime.com

地址:深圳市宝安区沙井街道沙头工业区裕民路22号二楼西面

您所在的位置:首页 > 技术文库 > 点胶机技术文章 >

自动点胶机胶水阻塞的原因分析

发布时间:2017-09-25 16:36:31   来源:本文转载于网络,由自动点胶机厂家创盈时代整理,欢迎转载    点击:

自动点胶机胶水阻塞的情况下,此种情形主要因过多的湿气或重复运用过的瞬间胶,应保证运用新鲜的瞬间胶,将管路以未含湿气的Aceton丙酮清洗过。运用的空气应断定完枯燥且于厂内空压与胶阀体系间加装过滤器。

In the case of automatic glue dispenser blocking, this situation is mainly due to excessive moisture or repeated use of instantaneous glue, should ensure the use of fresh instant glue, the pipeline with moisture free Aceton acetone cleaning. The air used shall be concluded as boring and shall be fitted with a filter between the plant air pressure system and the rubber valve system.

自动点胶机

自动点胶机点胶时如果出现断胶,我们可以通过一下方法判断其原因:

If the glue breaks in the dispensing machine, we can judge the reason by the way:

一:检查胶水是不是有问题(比方胶水中含有气泡,有颗粒沉淀物之类等),这种情况下会使点胶机发生点胶断胶的问题;

A: check the glue is not a problem (such as glue contains bubbles, particles, sediment, etc.), in this case will make the dispensing machine dispensing glue problem;

二:点胶控制器是否作业正常,因其作业的不正常或许其自身性能的缺乏,也会呈现点胶断胶的问题。

Two: dispensing controller whether the operation is normal, because of its operation is not normal, perhaps its own performance of the lack of, also can appear dispensing, breaking glue problem.

三:如果产品使用的是UV胶,勿直接增加UV胶于压力筒旧有的UV胶上。 先将原有UV胶放掉, 再胶UV胶倒入空的压力筒. 压力筒内的UV胶往往通过一段时间后会发生气泡而形成出胶不稳定。

Three: if the product is not directly increase in UV, UV UV glue on the old cylinder pressure. The original UV release, then glue into the UV pressure tube empty. The occurrence of air bubbles formed out of plastic instability will pressure cylinder through UV often after a period of time.

深圳市创盈时代科技有限公司是一家专注于平台点胶机,落地式点胶机,视觉点胶机,非标自动化设备的研发生产和销售于一体的国家高新技术点胶机厂家。

本文关键字:自动点胶机胶水

原文地址:http://www.chytime.com/news/djjs/1663.html

本文由www.chytime.com 深圳创盈时代科技有限公司 自动点胶机整理,欢迎转载,转载时请标明出处。

上一篇:全自动点胶机胶水特性及使用注意事项
下一篇:点胶机为什么有三轴四轴五轴之分?